Geschreven door Administrator
|
12 maart 2010
FilmFaced Birch Plywood F/F 1
 |
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Not allowed |
| 2. Inserted parts of the same type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 2 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 2 mm |
| 6. Hollows out of film |
Allowed by area of 0,1 cm2 inamount not more than 1 pc. on the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Not allowed |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Not allowed |
| 10. Stains out of cracks in inner plies of plywood panel |
Not allowed |
| 11. White stains and stripes on film, fired film |
Allowed with limitations |
| 12. Burnt film (burnout) |
Not allowed |
| 13. Film scratches |
Not allowed |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
| *TU 5512/011/447/79728/05 |
|
FilmFaced Birch Plywood F/F 2
|
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Allowed by wigth not more than 5 mm in case of its painting |
| 2. Inserted parts of the same type of film |
Allowed by area not more than 5cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area not more than 2cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 10 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 5 mm |
| 6. Hollows out of film |
Allowed by area not more than 5cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Allowed by size not more than 2x100 mm in amount not more than 1 pc. per 1 m of the board width in case of painting |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Allowed by size not more than 30x60 mm in amount not more than 1 pc. per 1m2 of the board side surface |
| 10. Stains out of cracks in inner plies of plywood panel |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1 m of the board width |
| 11. White stains and stripes on film, fired film |
Allowed |
| 12. Burnt film (burnout) |
Allowed |
| 13. Film scratches |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1m2of the board side surface |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
|
FilmFaced Wiremesh Birch Plywood F/W 1
 |
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Not allowed |
| 2. Inserted parts of the same type of film |
Allowed by area not more than 2cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area not more than 1cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 2 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 3 mm |
| 6. Hollows out of film |
Allowed by area of 2 cm2 inamount not more than 1 pc. on the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Not allowed |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Allowed by size not more than 10x10 mm in amount not more than 1 pc. per 1m2 of the board side surface |
| 10. Stains out of cracks in inner plies of plywood panel |
Not allowed |
| 11. White stains and stripes on film, fired film |
Allowed with limitations |
| 12. Burnt film (burnout) |
Not allowed |
| 13. Film scratches |
Not allowed |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
|
FilmFaced Wiremesh Birch Plywood F/W 2
|
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Allowed by wigth not more than 5 mm in case of its painting |
| 2. Inserted parts of the same type of film |
Allowed by area not more than 8cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area not more than 5cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 10 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 6 mm |
| 6. Hollows out of film |
Allowed |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Allowed by size not more than 2x100 mm in amount not more than 1 pc. per 1 m of the board width in case of painting |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Allowed by size not more than 30x60 mm in amount not more than 1 pc. per 1m2 of the board side surface |
| 10. Stains out of cracks in inner plies of plywood panel |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1 m of the board width |
| 11. White stains and stripes on film, fired film |
Allowed |
| 12. Burnt film (burnout) |
Allowed |
| 13. Film scratches |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1m2of the board side surface |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
|
FilmFaced Decor Birch PlywoodF/F 1
 |
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Not allowed |
| 2. Inserted parts of the same type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 2 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 2 mm |
| 6. Hollows out of film |
Allowed by area of 0,1 cm2 inamount not more than 1 pc. on the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Not allowed |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Not allowed |
| 10. Stains out of cracks in inner plies of plywood panel |
Not allowed |
| 11. White stains and stripes on film, fired film |
Not allowed |
| 12. Burnt film (burnout) |
Not allowed |
| 13. Film scratches |
Not allowed |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
| *TU 5512/011/447/79728/05 |
|
